Fluid Control Systems Selected product range

129Ordering chart for valvesTri-clamp ® according to ASME BPE, PTFE/EPDM diaphragm material, surface mechanical polished, Ra≤0.5/6.3µmControlfunctionA 2/2-way, NC byspring actionOrifice [mm]Port size[inch]Cv valuewater[GPM]Actuator sizeØ [mm]Minimum pilotpressure[psi]Max.operatingpressure [psi]Item no.8 1/4 1.16 40 72 145 445 30110 3/8 1.16 40 72 145 445 30615 1/2 4.64 63 72 145 445 31120 3/4 8.12 80 72 145 445 31625 1 13.92 80 80 109 445 32140 1 1/2 34.80 125 80 145 445 32650 2 59.74 125 80 102 445 33150 2 1/2 59.74 125 80 102 551 47380 3 185.6 225 72 145 551 156100 4 272.6 225 72 58 CD02009Port connection size equals the orifice diaphragm size except for port connection 65mm.At port connection 65mm the orifice diaphragm size equals 50mmOrdering chart for accessories3/2-way pilot valves Type 6012 P/6014 P with banjo bolt, port NPT 1/4“Pilot valve acc. to actuator size Voltage Item no.Type 6012 P for actuator Ø 40 mm 024 V/DC 427 923Control media inserts G 1/8 120 V/60 Hz 428 551Type 6012 P for actuator Ø 50 and 63 mm 024 V/DC 428 565Control media inserts G 1/4 120 V/60 Hz 428 567Type 6014 P for actuator Ø 80 to 125 mm 024 V/DC 429 134Control media inserts G 1/4 120 V/60 Hz 429 136Process Valves 2031 ForgedOrdering chart for DN 65-100 accessoriesCable plug Type 2508 (Form A), further versions see Datasheet Type 2508VoltageItem No.Plug configuration acc. to DIN EN 175301-803, Form A up to 150 V 008 376Suitable for food / sterile applications• The composition of the EPDM and PTFE/EPDM diaphragms corresponds to the Code of Federal Regulations,published by the FDA (Food and Drug Administration, USA).• The EPDM diaphragms correspond to the KTW-Recommendation (Plastics in the Drinking Water Sector).A Manufacturer‘s Declaration will be supplied on request.• The diaphragm valves are 3-A approved(3-A Sanitary Standards Symbol Administrative Council)Subject to modifications