Fluid Control Systems Selected product range

682/2-way Solenoid Valvefor fluids• Forced coupled diaphragm system• Compact body from brass or stainless steel• Slip-on coil6213• Anti-Waterhammer, low noise• Diaphragm materials NBR, EPDM, FKMSolenoid ValvesType 6213 can be combined with...Type 2508Cable plugType 1078Timer unitType 8600Dosing controlThe Type 6213 is a 2/2-way normally closed solenoidvalve with a forced coupled diaphragm system. Itswitches from 0 psi and can be used universally forfluids. For complete opening, a differential pressure ofat least 1.45 to 2.9psi is necessary.Power consumptionOrifice Inrush HoldDN AC AC DC[mm] [VA] [VA/W] [W]10 34 14/8 1013 36 14/8 1020 38 14/8 1025 160 38/18 72/4 ■40 202 38/18 72/4 ■■ Coil for UC with integrated HP elecronics in thecable plug.Technical dataOrificeDN 10 - 40 mmBody materialBrass acc. to DIN EN 50930-6, stainless steel 316LInner part of valveBrass bodyBrass, stainless steel and PPSStainless steel bodyStainless steel and PPSSeal materialNBR, FKM, EPDMMediaNBRNeutral fluids, water, hydraulic oil,oil without additivesFKMPer-solutions, hot oils with additivesEPDMOil-free and fat-free fluidsAmbient temperature Max. +55 °C (131 °F)Media temperatureNBR-10 to +80 °C (14 to 176 °F)FKM0 to +90 °C (32 to 194 °F)EPDM-30 to +120 °C (-22 to 248 °F)Voltage tolerance ±10%Duty cycle100% continuous ratingElectrical connection Tag connector acc. to DIN EN 175301-803 Form A(previously DIN 43650) for cable plug type 2508(see Accessories)Protection classIP 65 with cable plugInstallationAs required, preferably with actuator uprightApproval U.L. recognized with cable plug type 2508Subject to modifications