Fluid Control Systems Selected product range

338INSERTION fittingfor analysis measurement• 15 to 200 mm orifice• Fitting for Insertion sensors, transmitters,controllers in pure, aggressive orcontaminated liquidsSensors S020Type S020 can be combined with...Type 8200pH sensorType 8205pH transmitterThe fitting S020 can be used to connect any Insertiondevice for a measurement in the pipe, i.e. sensors, transmittersand controllers for pH, O.R.P. and conductivitymeasurement.• Large range of process connectionsTechnical dataPipe diameter DN 15 to DN 200 1)Fitting port connectionsMetalPlasticMaterialsSealBodyType 8220Conductivity sensorFluid temperatureMax. fluid pressureAmbient temperatureInternal thread, weld ends, Tri-Clamp®, flange,welding tab (external thread on request)True-union, fusion spigot(spigot on request)FKM and EPDMStainless steel (316L/1.4404), brass (CuZn39Pb2),PVC, PP, PVDF, PEMax. 130 °C (266 °F)Temperature limits may depend on the sensor and fitting.Please refer to appropriate instruction manual ordatasheet for more details.Max. 10 bar (145psi)Pressure limits may depend on the sensor and fitting.Please refer to appropriate instruction manual ordatasheet for more details. (see pressure-temperature chart onnext page)Temperature limits may depend on the sensor and fitting.Please refer to appropriate instruction manual ordatasheet for more details. (see pressure-temperature chart onnext page)Type 8225Conductivity transmitter1)Combination between fitting and sensor is sometimes restricted to some DN (see diagram on next page)Subject to modifications