Fluid Control Systems Selected product range

1362-way Diaphragm Valve, forged stainlesssteel, weld end and Tri-Clamp ® connectionProcess Valves 3233 ForgedType 3233 can be combined with...Type 8034Flow meterThe manually-operated diaphragm valve in compactform of the Type 3233 consists of a flow-optimisedstainless steel body with various surface finishes, adiaphragm and a manual actuator.The material combinations are selectable. The diaphragmis both a switch element and a sealing elementto the outside. It can be easily replaced. Theflow can be continually adjusted with the handwheel.The valves have no dead volume and can be mountedto be self-draining. This enables high flow capacitiesand a variety of applications to be realized.AType 3233with weld end,DN 8/10Orifice Port Angle Angle[mm] [inch] A B8 1/4 55° 35°10 3/8 55° 35°15 1/2 64° 26°20 3/4 62° 28°25 1 67° 23°40 1 1/2 67° 23°50 2 68° 22°50 2 1/2 67° 23°80 3 69° 21°100 4 70° 20°BType 3233with Tri-Clamp ®connectionMulti-Port Block Type 3233/2031Tandem valve• Hermetical separation of fluids from theoperating mechanism by diaphragm• Zero dead volume• Various surface finishes• Quality certifications /• Applications in Pharma, Biotechnologyand food industryTechnical dataBody MaterialsActuator MaterialsHandwheel and bonnet DN 8-50Handwheel and bonnet DN 65-100Seal materialMediaViscositySurface Finish(Average roughness)internal mechanical polishedinternal electro polishedinternal mirror finished(other see ordering chart)Media temperatureEPDMPTFE/EPDMAmbient temperaturePort connectionsWeld end acc. toTri-Clamp ® acc. toInstallationOptionsForged stainless steel 316 L/1.4435 / BN2Fe < 0.5% / C ≤ 0.03%PPS, stainless steelGrey cast iron, white epoxy coatedEPDM, PTFE/EPDM (FKM on request)Neutral gases and liquids, high-purity, sterile,aggressive or abrasive fluidsup to viscousRa ≤ 0.5 µmRa ≤ 0.4 µmRa ≤ 0.25 µm-10 to +130°C (14 to 266 °F)Briefly up to +150°C (302 °F) for steam sterilisation-10 to +130°C (14 to 266 °F)Up to +130 °C (166 °F)Briefly up to +150 °C (302 °F)• ASME BPE• ASME BPEMany other connections on requestAs required, preferably with actuator in upright positionLocking functionSubject to modifications