Fluid Control Systems Selected product range

332Ordering chart for the Type 8225 transmitterSensors 8225Voltage supplyOutputRelaysElectrode12-30 V DC 4-20 mA None K = 0.01 cable plug DIN EN 175301-803 418 950ConnectorItem no.2 cable glands 418 962K = 0.1 cable plug DIN EN 175301-803 418 9512 cable glands 418 963K = 1.0 cable plug DIN EN 175301-803 418 9522 cable glands 418 964K = 10 cable plug DIN EN 175301-803 418 9532 cable glands 418 9652 K = 0.01 2 cable glands 418 954K = 0.1 2 cable glands 418 955K = 1.0 2 cable glands 418 956K = 10 2 cable glands 418 957115/230 V AC 4-20 mA None K = 0.01 2 cable glands 426 935Note regarding the ordering of a complete transmitter:K = 0.1 2 cable glands 426 936K = 1.0 2 cable glands 426 937K = 10 2 cable glands 426 9382 K = 0.01 2 cable glands 426 943K = 0.1 2 cable glands 426 944K = 1.0 2 cable glands 426 945K = 0.01 2 cable glands 426 946A complete transmitter 8225 consists of the Insertion fitting Type S020 (see pages 340 to 347) and the transmitter Type 8225.FKM seal in standard; 1 Kit including a black EPDM seal for the sensor, an obturator for an M 20 x 1.5 cable gland, a 2 x 6 mm multiway seal and amounting instruction sheet is supplied with each transmitter.Please order the relevant Insertion fitting and the transmitter separately!Attention!No liability will be accepted for design errors. Please contact our Bürkert engineers as early as possible in the planning phase.Ordering chart for accessoriesDescriptionItem no.Set with 2 cable glands M 20 x 1.5 + 2 neoprene flat seals for cable gland or plug + 2 screw-plugs M 20 x 1.5 +2 multiway seals 2 x 6 mm449 755Set with 2 reductions M 20 x 1.5 / NPT1/2” + 2 neoprene flat seals for cable gland or plug + 2 screw-plugs M 20 x 1.5 551 782Set with 1 stopper for unused cable gland M 20 x 1.5 +1 multiway seal 2 x 6 mm for cable gland + 1 black EPDMgasket for the sensor + 1 mounting instruction sheet551 775Ring 619 205PC- Nut 619 204Set with 1 green FKM + 1 black EPDM gaskets 552 111Cable plug DIN EN 175301-803 with cable gland (Type 2508) 438 811Cable plug DIN EN 175301-803 with NPT1/2 reduction (Type 2509) - UR and UL approval 162 673Conductivity electrode K = 0.01 633 367Conductivity electrode K = 0.1 631 647Conductivity electrode K = 1.0 418 217Conductivity electrode K = 10 634 759Factory 2-point conductivity calibration certificate 550 675Measuring chamber stainless steel 316L (1.4404) (see Type S020, page 344) 553 611Subject to modifications