Fluid Control Systems Selected product range

138Process Valves 3233 ForgedOrdering chart (other versions on request)Stainless steel, diaphragm EPDM, weld end acc. ASME BPE, mechanical polished Ra≤0.5/6.3µmOrifice DN [mm] Port size [inch] Cv value water[GPM]Hand wheel/bonnetPPS/PPSPressure range [psi] Item no. Item no.Hand wheel/bonnetPPS/stainless steel8 1/4 1.16 Vac. - 145 447 935 447 97510 3/8 1.16 Vac. - 145 447 940 447 98015 1/2 7.0 Vac. - 145 445 573 446 26220 3/4 13.9 Vac. - 145 445 578 446 26725 1 18.6 Vac. - 145 445 583 446 27240 1 1/2 33.6 Vac. - 145 445 588 446 27750 2 58.0 Vac. - 101 445 593 –Vac. - 145 – 446 28250 2 1/2 62.6 Vac. - 101 / 145 449 820 551 566Hand wheel/bonnetgrey cast iron, whiteepoxy coatedHand wheel/bonnetStainless steel/Stainless steel80 3 185.6 0-73 449 821 on request100 4 272.6 0-73 449 822 on requestOrdering chart (other versions on request)Stainless steel, diaphragm PTFE/EPDM, weld end acc. ASME BPE, mechanical polished Ra≤0.5/6.3µmHand wheel/bonnetPPS/PPSHand wheel/bonnetPPS/stainless steelOrifice DN [mm] Port size [inch] Cv value water[GPM]Pressure range [psi] Item no. Item no.8 1/4 1.16 Vac. - 145 447 955 447 95510 3/8 1.16 Vac. - 145 447 960 448 00015 1/2 7.0 Vac. - 145 445 608 446 29720 3/4 13.9 Vac. - 145 445 613 446 30225 1 18.6 Vac. - 145 445 618 446 30740 1 1/2 33.6 Vac. - 145 445 623 446 31250 2 58.0 Vac. - 101 445 628 –Vac. - 145 – 446 31750 2 1/2 62.6 Vac. - 101 / 145 551 561 551 571Hand wheel/bonnetgrey cast iron, whiteepoxy coatedHand wheel/bonnetStainless steel/Stainless steel80 3 185.6 0-73 550 633 on request100 4 272.6 0-73 550 634 on requestSuitable for food applicationsThe composition of the EPDM and PTFE/EPDM diaphragms corresponds to the Code of Federal Regulations, published bythe FDA (Food and Drug Administration, USA). The EPDM diaphragms correspond to the KTW-Recommendation (Plastics inthe Drinking Water Sector). A Manufacturer‘s Declaration will be supplied on request.The diaphragm valves are 3-A approved.Subject to modifications