Fluid Control Systems Selected product range

266INLINE flow batch controller• 6 to 65 mm orifice, compact or remote versionSensors 8035 BType 8035 B can be combined with...Type S030INLINE fittingType 5282Solenoid valveThe complete Type 8035 INLINE batch controller isspecially designed for use in neutral, slightly aggressive,solid-free liquids.The batch controller consists of a compact fittingwith an integrated paddle-wheel (Type SO30) andan electronic module (Type SE35) connected by aQuarter-Turn.In connection with a valve as the actuating element,the Type 8035 B is able to control with high accuracydosing and filling processes. The unit is equipped withtwo totalizers, two relays and three dosing modes.The two output relays are used to activate the valveand to initiate alarms.The following dosing and filling operations arepossible:• Local dosing using keypad• Remote control dosing using a rotary knob (selectinga pre-set quantity) or binary data inputs.• Dosing controlled by a PLC unit• Automatic dosing controlled by a variation of pulseduration.• Dosing unit with 3 different modes(local, binary, time proportional)• Shows actual volume and totalizers• Automatic calibration: TEACH-IN• Simulation: all output signals provided withoutthe need for real flowTechnical dataMeasurement rangeFlow velocityAccuracy 1)Teach-InStandard K-factorRepeatabilityfrom 0.5 l/min up to 1200 l/min0.3 to 10 m/s (1.0 ft/s to 32.8 ft/s)≤ ±0.5% o.F.S.* (at 10 m/s)≤ ±(0.5% o.F.S.* + 2.5% o.R.*)≤ 0.4% o.R.*Electrical connection Cable glands M 20 x 1.5Voltage supply cableProtection classRelative humidityFluid temperatureAmbient temperatureStorage temperatureMax. fluid pressureViscosity of fluidsFitting body materialOther materialsElectronic housingFront panel folioLength: max. 50 m (Hall version), shielded;cross section: max. 1.5 mm 2IP 65 with cable gland mounted and tightened≤ 80%, non condensated0 to +50 °C (32 to 122 °F) (PVC fitting)0 to +80 °C (32 to 176 °F) (PP fitting)0 to +100 °C (32 to 212 °F) (PVDF, brass, stainless steel)0 to +60 °C (32 to 140 °F)0 to +60 °C (32 to 140 °F)PN10 (with plastic fitting) - PN16 (with metal fitting - PN40 on request)(see pressure-temperature chart, page 272)300 cSt. max.PVC, PP, PVDF, stainless steel 1.4404/316L, brassPCpolyesterOrifice DN 6 to DN 65 (see fitting Type S030, pages 270 to 275)Operating voltageCurrent consumptionInputOutputsPLC* o.F.S. = of Full Scale (10m/s)o.R. = of Reading12 to 30 V DC; 115/230 V AC - filtered and regulated≤ 70 mA4 binary inputs, 5... 30 V DC;Functions: dosing quantity choice, start-stop dosingTransistor open collector, NPN/PNP, 0... 30 V DC,100 mA, protected - for status and alarm messages2 relays, 3A, 230 VAC, freely programmable1) under reference conditions, i.e. fluid = water, temperatures = 20°C,up and downstream distances respected, adapted dimensions and pipesSubject to modifications