Fluid Control Systems Selected product range

2322/2 and 3/2-way Rocker Solenoid Valvefor analytical applications6606Type 6606 can be combined with...• With isolating diaphragm• For aggressive media• Low dead volume. low internal volume• Available on request:– Custom cable connections– Custom manifold systems– LED• versions available on requestType 2506Cable plugAnalytical ValvesThe direct-acting rocker solenoid valves with isolatingdiaphragm of Type 6606 (2/2 and 3/2-way) arehigh quality valves for analytical technology. Theyhave minimal dead volume with few crevices makingthem easy to flush out. The medium only comes intocontact with the body material and the FFKM seal.The heat transfer into the medium is minimal, as thebody is additionally isolated from the coil by a stainlesssteel plate. The valves are ideal for dosing, filling,mixing and distributing of small quantities of fluid formedical, analytical and laboratory applications.Technical dataOrificeDN 1.5 - 1.6 mmBody materialPVDF, ETFE, PEEKSeal materialFFKMMediaResistant to neutral and aggressive liquids and gases,see Bürkert chemical resistance chartTemperature media0 to +50 °C (32 to 122 °F)Ambient temperature Max. +55 °C (131 °F)Internal volumeDepending on bodyG/NPT 1/8 85 µlFlange 68 µlBody UNF 30 µl (2/2), 55 µl (3/2)on request < 5 µlVoltage tolerance ±10%Power consumption3.4 W at 12 and 24 V4 W at 110-120 V4 W at 230-240 VDuty cycle100% continuous ratingElectrical connection Tag connector sidewardsTag connectorat 12/24 V DCacc. to DIN EN 175301-803 Tag connector above(previously DIN 43650) C at 12/24 V DCfor cable plug Type 2506 2 FEP flying leads, 0.2 mm 2 , 500 mm long(see Accessories)Rectangular plugCircular connector on requestProtection classIP 54 with flying leads or with cable plugIP 40 with rectangular plugInstallationAs required, preferably with actuator in upright positionSubject to modifications