Fluid Control Systems Selected product range

121Ordering chart for DN 15-50 accessories3/2-way pilot valves Type 6012 P/6014 P with banjo bolt, port NPT 1/4“Pilot valve acc. to actuator sizeVoltage Item no.Type 6012 P for actuator Ø 40 mm 024 V/DC 427 923Control media inserts G 1/8 120 V/60 Hz 428 551Type 6012 P for actuator Ø 50 and 63 mm 024 V/DC 428 565Control media inserts G 1/4 120 V/60 Hz 428 567Type 6014 P for actuator Ø 80 to 125 mm 024 V/DC 429 134Control media inserts G 1/4 120 V/60 Hz 429 136Options and accessories (on request)• Control function B (opened by spring force) orI (double-acting actuator)• TopControl On/Off Type 8631• Electrical position feedback Type 1060 and 1062• Magnetic-inductive proximity sensors Type 1071• Stroke limitation max. and min./max.• Namur adapter for pilot valves with Namur flange• Manual actuator• Mounting key for actuator cover2030Ordering chart for accessoriesCable plug Type 2506 Form C or type 2508 Form A(Other versions, please see datasheets for Types 2506/2508)Plug configuration acc. to DIN EN 175301-803(previously DIN 43650)Ordering chart for DN 65-100 accessories3/2-way pilot valve Type 6014 with banjo bolt G 1/4, port NPT 1/4“VoltageItem no.Form C, 0 to 250 V w/o circuit (f. Type 6012 P) 008 353Form A, 0 to 250 V w/o circuit (f. Type 6014 P) 008 376Item no.Note:For design reasons, some accessories cannot be deliveredfor actuator sizes 40, 175 and 225 mm.Please request the Accessories datasheet 2XXX.Suitable for food & beverageThe composition of the EPDM and PTFE/EPDMdiaphragms corresponds to the Code of FederalRegulations, published by the FDA (Food andDrug Administration, USA). The EPDM diaphragmscorrespond to the KTW Recommendation (Plastics in theDrinking Water Sector). A Manufacturer’s Declaration willbe supplied on request.Process ValvesType 6014 for actuator Ø 175 and 225 mm 024 V/DC 429 134120 V/60 Hz 429 136Ordering chart for DN 65-100 accessoriesCable plug Type 2508 Form A (Other versions, please see datasheet for Type 2508)VoltageItem no.Plug configuration acc. to DIN EN 175301-803Form A (previously DIN 43650) without circuit(for Type 6014 P) up to 250 V 008 376Subject to modifications