Fluid Control Systems Selected product range

281Dimensions [mm]180Mounted on S020 fitting91Sensors8025 TOrdering chart for the Type 8025 T compact transmitter(other versions on request)VersionVoltage supplyOutputRelaysSensor version *ElectricalconnectionItem no.22288184H21113123see Type S020 Insertion fitting881168890126for H dimensions on page 296.Interconnection possibilitiesPLCSolenoid valveControl valvePulseoutputRelayoutput4-20 mAoutputType 8025 TCompact flow transmitterType S020Insertion fitting(see pages 294 to 301)Compact flow transmitter, 12-30 V DC 4-20 mA (2 wires) + pulse None short DIN EN 175301-803 418 7622 totalizers 2 cable glands 418 802long DIN EN 175301-803 418 7632 cable glands 418 8034-20 mA (3 wires) + pulse 2 short 2 cable glands 418 778long 2 cable glands 418 779115-230 V AC 4-20 mA (2 wires) + pulse None short 2 cable glands 418 423long 2 cable glands 418 4244-20 mA (3 wires) + pulse 2 short 2 cable glands 418 431long 2 cable glands 418 432Battery flow indicator, 2 x 9 V DC – None short – 418 4032 totalizers batteries long – 418 405* To select the sensor length, please consult the Note on fitting dimensions Type S020 (pages 295 to 297).Note regarding the ordering of a complete transmitter:A complete transmitter 8025 T consists of the Insertion fitting Type S020 (see pages 292 to 299) and the transmitter Type 8025 T.FKM seal in standard; 1 Kit including a black EPDM seal for the sensor, an obturator for an M 20 x 1.5 cable gland, a 2 x 6 mm multiway seal and amounting instruction sheet is supplied with each transmitter.Please order the relevant Insertion fitting and the transmitter separately!Attention!No liability will be accepted for design errors. Please contact our Bürkert engineers as early as possible in the planning phase.Subject to modifications