Download - Fuji Xerox Printers

Set Up ProcedureThe setting procedure is as follows:1. Setting up the printerSet the IP address on the printer control panel.Use the printer control panel or CentreWare Internet Services to set the following portsto [Enable].• Printing through LPD: LPD port (default: [Enable])• Printing through Port9100: Port9100 port (default: [Enable])Note• Before activating the LPD or Port9100 port, set the IP address of the printer.For details on how to set the IP address and the port, refer to the Setup and Quick Reference Guide.• CentreWare Internet Services allows more detailed settings. For details, refer to the Online Help forCentreWare Internet Services.2. Setting up the computerInstall TCP/IP Direct Print Utility and the printer driver for Windows 95/Windows 98/Windows Me.Refer to• “2.2 Setting Up the Computer” (P. 12)2.2 Setting Up the ComputerThis section explains necessary settings on the Windows 95/Windows 98/Windows Mecomputer.OverviewSet up the computer according to the following procedure:Installing the printer driverInstalling the printer driver as the local printer.Select LPT1 as the printing port.Refer to• “Installing the Printer Driver” (P. 13)Checking the TCP/IP protocolBefore installing TCP/IP Direct Print Utillity, check thatthe TCP/IP protocol is installed in the computer.Installing TCP/IP Direct Print UtilityRefer to• “Installing TCP/IP Direct Print Utility” (P. 13)12 2 Printing Using TCP/IP Direct Print Utility