Download - Fuji Xerox Printers

When Using Windows NT 4.0/Windows 2000/Windows XP/WindowsServer 2003The Printer Is Not PrintingCause Verification ActionIncorrect IP address.If LPD spool is set to[Memory], the print datasent by the user in a singleprint instruction hasexceeded the upper limitof the receiving capacityset up by the printercontrol panel of the printer.An irrecoverable error hasoccurred during printing.The data format of theprint data to be processedby the printer and thatsent by the computer aredifferent.Ask the network administrator to check thatthe IP address is correct.Check the upper limit of the receivingcapacity from the printer control panel andcompare it with the print data which was sentin the single print instruction.Check the error message on the printercontrol panel.Set up the correct IP address for the printer.1. If a single file of print data has exceededthe upper limit of the receiving capacity,split the file into smaller ones to keepthem below the upper limit of thereceiving capacity.2. If multiple files have exceeded the upperlimit of the receiving capacity, reduce thenumber of files which can be sent at onego.Switch off the printer, then switch it on again.- Disable the output function of Ctrl-D.Unable to Obtain the Desired Print ResultsCause Verification ActionThe specified printlanguage and that of theprint data are different.The printer driver for thisprinter is not used. (Theprinter driver of anothercompany is used)Check the specified print language and thatof the print data.Check that the printer driver which came withthis printer has been selected.Specify the print language consistent withthat used in the print data.Select the printer driver which came with thisprinter. If it does not appear on the selectionlist, install and select the printer driver.If a printer driver from another maker is used,the printer may not print properly.66 11 Troubleshooting