Download - Fuji Xerox Printers

IPX/SPX Frame TypesThe printer supports the following types of Ethernet interface:• 10Base-T (Twisted Pair Cable)• 100Base-TX (Twisted Pair Cable)The following frame types are supported:• Ethernet II specification• IEEE802.3 specification• IEEE802.3/802.2 specification• IEEE802.3/802.2/SNAP specificationThe printer will send out packets of each frame type on the connected network and activateautomatically to the frame type which responds first.However, if other protocols are running simultaneously on the same network, use the frametype that the NetWare server is using.Note• Some network components (such as the hub) may not support automatic setup for frame type. If thedata link indicator light of the port which is connected to the printer of the network component does notlight up, match the setting ([IPX/SPX Frame Type]) of the printer to the frame type of the file server.Set Up ProcedureThe setting flow is as follows:1. Setting up the printerBy using the printer control panel or CentreWare Internet Services, set the NetWareport to [Enable] (default: [Disable]).Print the [System Settings List] and check the device name and network address thatlisted in the Netware.Refer to• Setup and Quick Reference Guide2. Settings for the NetWare EnvironmentUsing PCONSOLE or NetWare Administrator (NWADMIN), create print queue, printserver and printer, and assign the respective objects.By using CentreWare Internet Services, transfer the set NetWare environment to theprinter.Important• When setting up for the PCONSOLE or NWADMIN, use the device name checked in step 1 for the printserver name. Set Printer Location as Auto Load (Local).• For information on how to use PCONSOLE or NWADMIN, refer to the manual which comes withNetWare. NWADMIN can be used on NetWare 5 or later.Note• CentreWare Internet Services allows more detailed settings. For details, refer to the Online Help forCentreWare Internet Services.• By using the NetWare Setup Wizard, you can set the printing environments for the NetWare server orprinter. For details about the NetWare Setup Wizard, refer to “9.2 NetWare Setup Wizard” (P. 56).3. Setting up the computerInstall the printer driver to the NetWare client computer.6.1 Installation Procedure for Printing Through NetWare 35