Download - Fuji Xerox Printers

3. For Windows 95/Windows 98/Windows Me, enter only the password (SMBAdministrator Password) and for Windows NT 4.0/Windows 2000/Windows XP/Windows Server 2003, enter the user name (SMB Administrator Name) and password(SMB Administrator Password).Then, click [OK].Note• The factory default of Administrator Name is “ADMIN” and Administrator Password is “x-admin”.4. Using a text editor like Notepad, open the [config.txt] file.5. If necessary, change each item, and then overwrite and close the [config.txt] file.The [message.txt] file is created inside the [admintool] folder.Refer to• For details on the [config.txt] file: “Setting Format of [config.txt] File” (P. 30)6. Open the [message.txt] file and check that it displays the following information.Note• If the [message.txt] file is not displayed, select [Refresh] from the [View] menu. If an error messageappears, check the contents that have been set again.7. Close the [message.txt] file.8. Switch off the printer, then switch on it again.Note• The setting changes you have made will be enabled when switching off and on the power switch orsaving [config.txt] file with its [Reboot] option set to [Yes].5.2 Setting/Changing SMB Using the [config.txt] File 29