13.08.2018 Views

[Studies in Computational Intelligence 481] Artur Babiarz, Robert Bieda, Karol Jędrasiak, Aleksander Nawrat (auth.), Aleksander Nawrat, Zygmunt Kuś (eds.) - Vision Based Systemsfor UAV Applications (2013, Sprin

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

86 Z. <strong>Kuś</strong> and A. <strong>Nawrat</strong><br />

Transients and <strong>in</strong> the response to the camera position changes <strong>in</strong> axis<br />

$y$ are presented <strong>in</strong> figure 10. The change of the camera position is equal to the<br />

change of the helicopter position which is the result of w<strong>in</strong>d blow<strong>in</strong>g <strong>in</strong> a vertical<br />

surface. As figure 10 presents the change of the position caused the change of<br />

the required angle of camera rotation <strong>in</strong> direction of the tracked object . The<br />

camera head turns <strong>in</strong> order to set the camera rotation angle to set value .<br />

Transient shows that control system works <strong>in</strong> an excellent manner. There are<br />

not any overshoots and is follow<strong>in</strong>g signal very closely.<br />

As figure 10 presents transient has neither overshoots nor steady state error.<br />

Fig. 10. Transients and <strong>in</strong> the response to the camera position changes <strong>in</strong> axis <br />

Figure 11 represents the situation when the helicopter rotation angle is changed<br />

after distortion occurs.<br />

Transients and <strong>in</strong> the response to the helicopter rotation angle are<br />

presented <strong>in</strong> figure 12. The change of the camera rotation is equal to the<br />

change of the helicopter rotation which is the result of swirl<strong>in</strong>g w<strong>in</strong>d. As figure<br />

12 presents the change of does not cause the change of the required angle of<br />

camera rotation . It is caused by the same camera position before and after<br />

distortion occurs. The helicopter rotation causes the change of . The camera<br />

head turns <strong>in</strong> order to set the camera rotation angle to set value . Transient<br />

shows that control system works <strong>in</strong> a perfect manner. There are overshoots <strong>in</strong><br />

this moment when the disturbance occurs; however, signal is follow<strong>in</strong>g <br />

signal very quickly.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!