Installation Manual

Chapter 6 ��������
or
Look through the list of internal directory numbers and
validate the entry displayed.
Delete the digits contained in the field "Direct no." (use the down arrow
navigator key to display this option)
Reject the complete list of DDI numbers as defined and return to the start
of the function.
Validate the complete list of DDI numbers.
The following error messages can appear when entering the data:
- "Number already used" : the DDI number is already attributed to another internal
number.
- "The specified number is outside the assigned range" : invalid DDI number (it contains
a * or # for example).
- "Direct Dialing Table full" : the maximum size of the table of public numbers (99 entries)
has been exceeded.
The following function is only available for Hotel installations.
the first DDI number.
Access the definition of a pool of DDI numbers for hotel rooms; display
6-4 ������������ � ����� � ����� ���� � ������������ ������