Installation Manual

More documents

Recommendations

Info

Chapter 4 �� Audio input characteristics: Input impedance : 600 Ohms Fuse characteristics: - Max. power : 10 W - Max. voltage : 60 V - Max. current : 500 mA The contacts of the alarm and doorphone controls have the same electrical characteristics as those indicated above. 4.2.1.7.2 Connecting a background music tuner This is connected via the AUDIN input of the AUDIO-IN connector. Audio input characteristics: - Input impedance : 600 Ohms - Input level: access + 4.7 dBr or + 15 dBr 4-16 ��
4.2.1.7.3 Connecting an alarm The alarm is activated in the event of a false stopping of the system. It is connected via the ALARM output (control contact closed when idle) of the AUDIO-IN connector. 4.2.1.7.4 Connecting a broadcast loudspeaker Broadcast loudspeakers are connected via the AUDOUT output of the AUDIO-OUT connector. Audio output characteristics: - Output impedance: < 500 Ohms - Output level: access + 3 dBr 4.2.1.7.5 Connecting a general ringer �� The general ringer is connected via the CENRG output of the AUDIO-OUT connector. �� 4-17
Page 1 and 2:
Compact Edition, Advanced Edition,
Page 3 and 4:
��
Page 5 and 6:
��
Page 7 and 8:
��
Page 9 and 10: �� 1 ��
Page 11 and 12: The EC labeling indicates that this
Page 13 and 14: Note: Figure 1.4: Second Generation
Page 15 and 16: �� 2 ��
Page 17 and 18: - 14 ports. - 1 CPU slot + 1 MIX sl
Page 19 and 20: 2.3 Installation 2.3.1 Overview 2.3
Page 21 and 22: Board Function Optional boards Conn
Page 23 and 24: Board Function Optional boards Conn
Page 25 and 26: WAN Green LED showing good WAN func
Page 27 and 28: 2.4.1.7 AMIX-1 X/Y/Z Boards These b
Page 29 and 30: Each category-5 RJ45 connector has
Page 31 and 32: DAUGHTER BOARDS CPU-1/ CPU-2 CPUe-1
Page 33 and 34: Boards Slots 1-2 CPU Slot CPU-1, CP
Page 35 and 36: Board MIX Slot CPU Slot CPU-2, CPU-
Page 37 and 38: �� 3 ��
Page 39 and 40: 3.2.1.1 Voice services available in
Page 41 and 42: Controlled services Relevant softwa
Page 43 and 44: PIMphony Pro All 0 +1 250 PIMphony
Page 45 and 46: �� 4 ��
Page 47 and 48: 4.1.1.2 ENVIRONMENT 4.1.1.2.1 Clima
Page 49 and 50: RJ45 pin 1 2 3 4 5 6 7 8 LAN TX+ TX
Page 51 and 52: Access Type Impedance Alcatel Refle
Page 53 and 54: System - Reflexes terminal distance
Page 55 and 56: Caution: The AFU-1 board (daughter
Page 57 and 58: The PRA board is connected to a dig
Page 59: Category 5 cable, FTP or STP, imped
Page 63 and 64: - A single doorphone with doorstrik
Page 65 and 66: External battery units are availabl
Page 67 and 68: 3. Place the batteries flat in the
Page 69 and 70: 6. Close the unit and secure it wit
Page 71 and 72: c. Connect the two units using the
Page 73 and 74: 7. Remove the mounting clip and the
Page 75 and 76: You must first prepare the external
Page 77 and 78: 5. Close the unit and secure it wit
Page 79 and 80: 4.3.1.5.1 Alcatel-Lucent OmniPCX Of
Page 81 and 82: Attaching the line cable: - Turn th
Page 83 and 84: List of abbreviations - TD: Transmi
Page 85 and 86: For Alcatel-Lucent First and Easy R
Page 87 and 88: - Manual, if the terminals are not
Page 89 and 90: - Initialize the set - Program keys
Page 91 and 92: Static 1. Connect the power supply.
Page 93 and 94: Figure 4.50: Alcatel-Lucent IP Touc
Page 95 and 96: For an initialization that is Dynam
Page 97 and 98: - AOM Alcatel-Lucent 8 series and A
Page 99 and 100: 2. Select Name and enter the name t
Page 101 and 102: In fact, only the direct call key c
Page 103 and 104: 42 additional keys. - Add-On Module
Page 105 and 106: 4.7.1 Hardware description 4.7.1.1
Page 107 and 108: 4.7.2.2 Jumpers _ _ _ c h a n g e -
Page 109 and 110: _ _ _ c h a n g e - e n d _ _ _ 1.
Page 111 and 112:
Both cables should have the same le
Page 113 and 114:
There is no hardware configuration
Page 115 and 116:
_ _ _ c h a n g e - e n d _ _ _ Not
Page 117 and 118:
1 1926.720 1927.584 2 1924.992 1924
Page 119 and 120:
External antennae According to the
Page 121 and 122:
The solution proposed alternates tw
Page 123 and 124:
4.9.1.1.2 Ethernet network access b
Page 125 and 126:
4.9.1.3 E-MAIL Configure the Intern
Page 127 and 128:
4.10.3 Limits Supported Windows OS
Page 129 and 130:
esource keys are not preserved. The
Page 131 and 132:
_ _ _ c h a n g e - e n d _ _ _ Int
Page 133 and 134:
It is possible to add one or two mo
Page 135 and 136:
�� 5 ��
Page 137 and 138:
��
Page 139 and 140:
��
Page 141 and 142:
��
Page 143 and 144:
��
Page 145 and 146:
��
Page 147 and 148:
There are 10 pages of virtual keys
Page 149 and 150:
�� 6 ��
Page 151 and 152:
digits, national or with *). number
Page 153 and 154:
10: Number of numbers still availab
Page 155 and 156:
This function is only available if
Page 157 and 158:
6.1.1.14 SYSTEM RESET This menu is
Page 159 and 160:
- A connection to the switch connec
Page 161 and 162:
1. Open OMC. 2. Open the Tools fold
Page 163 and 164:
Access to modes 2, 3, 4 and 5 is pa
Page 165 and 166:
- Metering • Cost of telephone me
Page 167 and 168:
Alcatel-Lucent OmniPCX Office Commu
Page 169 and 170:
navigation bar. The administration
Page 171 and 172:
ISDN connection 1. Connection accou
Page 173 and 174:
and modify the desired parameters.
Page 175 and 176:
Click on Wizards in the navigation
Page 177 and 178:
�� 7 ��
Page 179 and 180:
Always take anti-static precautions
Page 181 and 182:
7.1.1.6.1 Handling 7.1.1.6.2 Storag
Page 183 and 184:
�� 8 ��
Page 185 and 186:
Direct Dialing In. Direct external
Page 187 and 188:
ITU International Telecommunication
Page 189 and 190:
PSTN Public Switched Telephone Netw
Page 191 and 192:
URL Uniform Resource Locator. Addre
show all

Installation Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?