Installation Manual

RJ45 pin 1 2 3 4 5 6 7 8
LAN TX+ TX- RX+ RX-
Up-Link TX+ TX- RX+ RX-
Unit 1 to 3 outputs RX+ RX- TX+ TX-
4.2.1.1.3 SLIboard
- LAN : 10/100 base T Ethernet port (MDI-II/straight).
- UNIT1, UNIT2, UNIT3: ports on integrated LAN switch (MDI-X/crossover).
- UPLINK : integrated LAN switch uplink port (MDI-II/straight).
RJ45 pin 1 2 3 4 5 6 7 8
1 to 16 ZA ZB
4.2.1.1.4 UAI board
- 1 to 16: connecting analog Z terminals.
RJ45 pin 1 2 3 4 5 6 7 8
1 to 16 (UAI) L1 L2
- 1 to 16: connection of Alcatel Reflexes terminals or DECT 4070 IO/EO base stations.
4.2.1.1.5 UAI-1 board
RJ45 pin 1 2 3 4 5 6 7 8
1 L1 L2 0V 48V
2 to 16 L1 L2
- 1 : connection of an EPS48 external power supply + connection of Alcatel Reflexes
terminals or DECT 4070 IO/EO base stations.
- 2 to 16: connection of Alcatel Reflexes terminals or DECT 4070 IO/EO base stations.
4.2.1.1.6 BRA board
RJ45 pin 1 2 3 4 5 6 7 8
1 to 8 TX+ RX+ RX- TX-
- 1 to 8: connection of T0/DLT0 basic access.
4.2.1.1.7 PRA Board
RJ45 pin 1 2 3 4 5 6 7 8
NETW outputs RX+ RX- TX+ TX-
PBX outputs TX+ TX- RX+ RX-
- NETW: connection to the public network (TNL).
������������ ��� �������
������������ � ����� � ����� ���� � ������������ ������ 4-5