Installation Manual

More documents

Recommendations

Info

Chapter 4 �� - Plug in the handset cable (connector ) into the guide intended for this purpose. Wall mounted Preparing the terminal - Turn the terminal - Unscrew A and remove the metal plate. - Slide this plate up the lower groove and secure it with screw B. - Remove the handset hang-up lug by turning screw C through half a turn. Mounting the terminal - Drill two hole respecting the dimensions given below. - Position the supporting screws as shown below. - Attach the terminal Mounting optional modules: 4-40 ��
For Alcatel-Lucent First and Easy Reflexes terminals, the optional module is external to the terminal; this module can be placed on a table or wall mounted. The installation simply involves connection between the terminal, the module and the wall sacket. Wall mounting an optional module - Drill two holes (separation = 105 mm, diameter = 6 mm). - Position the fixing screws. - Attach the module 4.4.2 E-Reflexes Terminals 4.4.2.1 Cabling 4.4.2.1.1 Cabling diagram 3 terminal models are available that are compatible with IP and VoIP standards: - Advanced e-Reflexes (4035IP) - Premium e-Reflexes (4020IP) - Easy e-Reflexes (4010IP) CONNECTION �� 4-41
Page 1 and 2:
Compact Edition, Advanced Edition,
Page 3 and 4:
��
Page 5 and 6:
��
Page 7 and 8:
��
Page 9 and 10:
�� 1 ��
Page 11 and 12:
The EC labeling indicates that this
Page 13 and 14:
Note: Figure 1.4: Second Generation
Page 15 and 16:
�� 2 ��
Page 17 and 18:
- 14 ports. - 1 CPU slot + 1 MIX sl
Page 19 and 20:
2.3 Installation 2.3.1 Overview 2.3
Page 21 and 22:
Board Function Optional boards Conn
Page 23 and 24:
Board Function Optional boards Conn
Page 25 and 26:
WAN Green LED showing good WAN func
Page 27 and 28:
2.4.1.7 AMIX-1 X/Y/Z Boards These b
Page 29 and 30:
Each category-5 RJ45 connector has
Page 31 and 32:
DAUGHTER BOARDS CPU-1/ CPU-2 CPUe-1
Page 33 and 34: Boards Slots 1-2 CPU Slot CPU-1, CP
Page 35 and 36: Board MIX Slot CPU Slot CPU-2, CPU-
Page 37 and 38: �� 3 ��
Page 39 and 40: 3.2.1.1 Voice services available in
Page 41 and 42: Controlled services Relevant softwa
Page 43 and 44: PIMphony Pro All 0 +1 250 PIMphony
Page 45 and 46: �� 4 ��
Page 47 and 48: 4.1.1.2 ENVIRONMENT 4.1.1.2.1 Clima
Page 49 and 50: RJ45 pin 1 2 3 4 5 6 7 8 LAN TX+ TX
Page 51 and 52: Access Type Impedance Alcatel Refle
Page 53 and 54: System - Reflexes terminal distance
Page 55 and 56: Caution: The AFU-1 board (daughter
Page 57 and 58: The PRA board is connected to a dig
Page 59 and 60: Category 5 cable, FTP or STP, imped
Page 61 and 62: 4.2.1.7.3 Connecting an alarm The a
Page 63 and 64: - A single doorphone with doorstrik
Page 65 and 66: External battery units are availabl
Page 67 and 68: 3. Place the batteries flat in the
Page 69 and 70: 6. Close the unit and secure it wit
Page 71 and 72: c. Connect the two units using the
Page 73 and 74: 7. Remove the mounting clip and the
Page 75 and 76: You must first prepare the external
Page 77 and 78: 5. Close the unit and secure it wit
Page 79 and 80: 4.3.1.5.1 Alcatel-Lucent OmniPCX Of
Page 81 and 82: Attaching the line cable: - Turn th
Page 83: List of abbreviations - TD: Transmi
Page 87 and 88: - Manual, if the terminals are not
Page 89 and 90: - Initialize the set - Program keys
Page 91 and 92: Static 1. Connect the power supply.
Page 93 and 94: Figure 4.50: Alcatel-Lucent IP Touc
Page 95 and 96: For an initialization that is Dynam
Page 97 and 98: - AOM Alcatel-Lucent 8 series and A
Page 99 and 100: 2. Select Name and enter the name t
Page 101 and 102: In fact, only the direct call key c
Page 103 and 104: 42 additional keys. - Add-On Module
Page 105 and 106: 4.7.1 Hardware description 4.7.1.1
Page 107 and 108: 4.7.2.2 Jumpers _ _ _ c h a n g e -
Page 109 and 110: _ _ _ c h a n g e - e n d _ _ _ 1.
Page 111 and 112: Both cables should have the same le
Page 113 and 114: There is no hardware configuration
Page 115 and 116: _ _ _ c h a n g e - e n d _ _ _ Not
Page 117 and 118: 1 1926.720 1927.584 2 1924.992 1924
Page 119 and 120: External antennae According to the
Page 121 and 122: The solution proposed alternates tw
Page 123 and 124: 4.9.1.1.2 Ethernet network access b
Page 125 and 126: 4.9.1.3 E-MAIL Configure the Intern
Page 127 and 128: 4.10.3 Limits Supported Windows OS
Page 129 and 130: esource keys are not preserved. The
Page 131 and 132: _ _ _ c h a n g e - e n d _ _ _ Int
Page 133 and 134: It is possible to add one or two mo
Page 135 and 136:
�� 5 ��
Page 137 and 138:
��
Page 139 and 140:
��
Page 141 and 142:
��
Page 143 and 144:
��
Page 145 and 146:
��
Page 147 and 148:
There are 10 pages of virtual keys
Page 149 and 150:
�� 6 ��
Page 151 and 152:
digits, national or with *). number
Page 153 and 154:
10: Number of numbers still availab
Page 155 and 156:
This function is only available if
Page 157 and 158:
6.1.1.14 SYSTEM RESET This menu is
Page 159 and 160:
- A connection to the switch connec
Page 161 and 162:
1. Open OMC. 2. Open the Tools fold
Page 163 and 164:
Access to modes 2, 3, 4 and 5 is pa
Page 165 and 166:
- Metering • Cost of telephone me
Page 167 and 168:
Alcatel-Lucent OmniPCX Office Commu
Page 169 and 170:
navigation bar. The administration
Page 171 and 172:
ISDN connection 1. Connection accou
Page 173 and 174:
and modify the desired parameters.
Page 175 and 176:
Click on Wizards in the navigation
Page 177 and 178:
�� 7 ��
Page 179 and 180:
Always take anti-static precautions
Page 181 and 182:
7.1.1.6.1 Handling 7.1.1.6.2 Storag
Page 183 and 184:
�� 8 ��
Page 185 and 186:
Direct Dialing In. Direct external
Page 187 and 188:
ITU International Telecommunication
Page 189 and 190:
PSTN Public Switched Telephone Netw
Page 191 and 192:
URL Uniform Resource Locator. Addre
show all

Installation Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?