Installation Manual
Installation Manual
Installation Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5. Close the unit and secure it with the four screws.<br />
6. Stick a label on the unit stating the date of the installation and the number of batteries<br />
installed.<br />
Connecting to the Alcatel-Lucent OmniPCX Office Compact Edition unit<br />
1. Switch off the Alcatel-Lucent OmniPCX Office Communication Server system and then:<br />
a. Unplug the power cable from the mains socket.<br />
b. Disconnect the mains adapter from the Alcatel-Lucent OmniPCX Office Compact<br />
Edition unit.<br />
c. Using a screwdriver, unscrew the power supply module (PSXS or PSXS-N) from the<br />
side of the Alcatel-Lucent OmniPCX Office Compact Edition unit and pull the module<br />
out of the cabinet.<br />
2. Move the red extBAT jumper from the NO position to the YES position.<br />
������������ ��� �������<br />
Note:<br />
Since R5.0, it is possible to install a hard disk on a Alcatel-Lucent OmniPCX Office Compact Edition<br />
unit. In that case, it is MANDATORY to install the external battery unit, and the extBAT jumper of the<br />
PSXS MUST be set to YES.<br />
������������ � ����� � ����� ���� � ������������ ������ 4-33
Change language