13.01.2013 Views

Installation Manual

Installation Manual

Installation Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

�������<br />

7 ����������� ��������<br />

7.1 Maintenance Level 1<br />

7.1.1 Maintenance<br />

This module provides maintenance advice on different hardware components of the<br />

Alcatel-Lucent OmniPCX Office Communication Server system.<br />

7.1.1.1 BATTERY MAINTENANCE<br />

Alcatel-Lucent OmniPCX Office Communication Server systems (except the Alcatel-Lucent<br />

OmniPCX Office Compact Edition) are supplied with internal batteries that provide back-up<br />

power in the event of a mains power failure. Alternatively, all systems may be optionally<br />

equipped with an external battery pack to provide back-up power.<br />

To guarantee system shutdown without data loss in the event of a mains power failure or if the<br />

mains plug is unplugged from the wall socket, replace the batteries every two years. This<br />

maintenance operation is vital to guarantee sufficient power autonomy to allow the files to be<br />

saved before the system shuts down.<br />

Before replacing batteries, the system must be powered down and the power cable removed<br />

from the mains supply.<br />

- To replace internal batteries, the rear panel of the system cabinet must be removed and<br />

the battery drawer pulled out.<br />

- To replace external batteries, the external battery box must be opened.<br />

To maintain a good balance, replace all the batteries at the same time with<br />

batteries of the same type, from the same manufacturer and from the same batch.<br />

Make sure you respect the correct polarities when replacing batteries. There is a<br />

risk of explosion if the batteries are incorrectly replaced. Used batteries must be<br />

disposed of according to the battery manufacturer's instructions.<br />

The batteries are supplied uncharged. File saving in the event of a power failure can only be<br />

guaranteed once the batteries have been charged; that is, about 12 hours after turning on the<br />

system (CPU-1/CPU-2/CPU-3/CPUe-1/CPUe-2 switch in ON position).<br />

7.1.1.1.1 Internal battery characteristics<br />

- number: 1 (Rack 1), 2 in parallel (Rack 2) or 3 in series (Rack 3)<br />

- sealed lead battery<br />

- 1,2 Ah / 12 V<br />

- fire resistance better than or equal to UL94-V2<br />

7.1.1.1.2 External battery characteristics<br />

- number: up to 2 for CE and Compact Edition 2nd Generation, up to 3 for S and M systems,<br />

up to 6 for L systems<br />

������������ � ����� � ����� ���� � ������������ ������ 7-1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!