HP BladeSystem Onboard Administrator User Guide - HP Business ...

• Data collections–As part of the data collection process, the Onboard Administrator sends data to Insight
Remote Support to enable proactive advice and consulting. Information is sent for the enclosure
hardware as well as populated system components including the LCD module, Onboard Administrator
modules, enclosure fan modules, enclosure power supply modules, interconnect modules and server
blades.
Examples of data that is collected for these system components include:
o Hardware module descriptors such as manufacturer, product name, serial number, UUID, part
number, and location within the enclosure
o Firmware revision
o Diagnostic and status information
o Power and thermal configuration and status information
o Network and port mapping information
For more information, see "Insight Remote Support Data Collections (on page 106)."
Registering HP Insight Remote Support
1. Verify that the Insight Remote Support hosting server is Insight Remote Support 7.0 or later.
2. Enter the Insight Remote Support server hostname or IP address and port number. The default port is
7906.
3. Click Register.
Unregistering HP Insight Remote Support
To discontinue monitoring of your enclosure:
1. Click Unregister. The following message appears:
Are you sure you want to Unregister and Disable Automated Support?
2. Click OK.
3. Clear the Enabled option on the Device Summary tab in the Devices section of the HP Insight Remote
Support Console. For more information, see the Insight Remote Support documentation.
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 104