HP BladeSystem Onboard Administrator User Guide - HP Business ...
HP BladeSystem Onboard Administrator User Guide - HP Business ...
HP BladeSystem Onboard Administrator User Guide - HP Business ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
249 Feb 29 was specified but the year is not a leap year.<br />
250 The CA certificate is invalid.<br />
251 Exceeded the maximum number of CA certificates.<br />
252 No CA certificates are imported.<br />
253 This CA certificate is already imported.<br />
254 A certificate is already mapped to this user.<br />
255 An undocumented error has occurred. Please update your firmware to the latest firmware version if<br />
necessary. Contact <strong>HP</strong> if the problem persists.<br />
256 This certificate is already mapped to another user.<br />
257 The user certificate could not be verified.<br />
258 This operation is not permitted when two-factor authentication is enabled.<br />
260 This operation cannot be performed when AlertMail is disabled.<br />
261 This operation cannot be performed when the AlertMail settings are not configured.<br />
262 This operation cannot be performed when SNMP is disabled.<br />
263 A certificate must be mapped to <strong>Administrator</strong> or LDAP must be enabled with a configured groups with<br />
administrator privilege to enable two-factor authentication.<br />
265 A certificate is not mapped to this user account.<br />
266 Two-factor authentication is in effect.<br />
267 Two-factor authentication configuration was not changed.<br />
268 An iLO image is already staged.<br />
269 The file was not a proper iLO image for the blade.<br />
270 The crc32 supplied does not match the provided file.<br />
271 Cannot delete the last CA with two-factor authentication enabled.<br />
272 The <strong>Onboard</strong> <strong>Administrator</strong> cannot communicate with iLO.<br />
273 An EBIPA configuration error occurred.<br />
274 Link Loss Failover intervals must be between 30 and 86400 seconds.<br />
275 Network speed must be either 10Mbit or 100Mbit.<br />
276 Network duplex setting must be HALF or FULL.<br />
277 The password does not conform to password rules.<br />
278 Invalid minimum password value<br />
279 A firmware image is already staged.<br />
280 The provided file was not a proper image.<br />
281 Bad image CRC checksum<br />
282 Remote system logging must be enabled to perform this operation.<br />
283 Invalid remote port. The port must be a number between 1 and 65535.<br />
284 The remote syslog server address must be configured before enabling remote system logging.<br />
Troubleshooting 252
Change language