HP BladeSystem Onboard Administrator User Guide - HP Business ...

Interconnect bays
Interconnect Bay Summary screen
In the Enclosure Information menu, the Interconnect Bays category lists all the interconnect devices within the
enclosure. Selecting the interconnect bays menu item directly opens the interconnect device list with a grid
that shows the status of each interconnect device within the enclosure as well as the UID status, power state,
tray type, management URL, and product name. For information about accessing iLO from the Interconnect
Bay Summary, see Interconnect Bay Information tab (on page 158).
The checkbox in the first column on the top row toggles all checkboxes on or off for all enclosure interconnect
devices. This feature is useful if you want to toggle the UID state for all interconnect devices at the same time.
Otherwise, the first column contains checkboxes that can be used to select individual interconnects. After the
appropriate interconnects are selected, the Virtual Power or UID state dropdown menus can be selected to
perform the appropriate action.
The Virtual Power menu enables you to turn an interconnect device on or off. HP recommends that only one
device be turned on or off at a time using this feature.
Column Description
Checkbox
Bay
Status
UID
Power State
Module Type
Click the checkboxes next to the bay or bays where you want to apply the Virtual Power
and UID State features.
Bay in the enclosure of the corresponding interconnect device. This field displays only
populated bays. Empty bays are not displayed in this table.
Overall status of the interconnect device. Possible values are Unknown, OK,
Degraded, and Failed.
Status of the UID on the interconnect device. Possible values are On (blue) or Off (gray).
Power state of the interconnect device. Possible values are On or Off.
Network interface type for the interconnect device installed in this bay. Possible values
are Ethernet or fiber.
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 155