HP BladeSystem Onboard Administrator User Guide - HP Business ...

HP ProLiant BL680c G7 Servers
Device bay port mapping table for c3000 Enclosure
If a device is not present, the checkbox is disabled and the port cannot be viewed.
The server blades are mapped to the interconnect bays in the following manner. The terms 1x/2x or 4x refer
to the number of interconnect lanes per port provided by the mezzanine card.
Half-height server blade
The following table lists the available configurations for half-height devices installed in device bay N (1-8).
Connection Port number Connects to
interconnect bay/port
Embedded NIC
Mezzanine slot 1—1x or
2x cards (4x cards are not
supported in this slot)
Mezzanine slot 2—1x or
2x cards
NIC 1 (Port:1)
NIC 2 (Port:2)
1x/2x port 1
1x/2x port 2
1x/2x port 1
1x/2x port 2
1x/2x port 3
1x/2x port 4
1/Port N
1/Port N+8
2/Port N
2/Port N+8
3/Port N
4/Port N
3/Port N+8
4/Port N+8
Comments
One single-wide Ethernet
interconnect module
• One single-wide
interconnect module
• Only two ports will be
connected.
• Four port cards will only
connect the first two ports.
One or two single-wide
interconnect modules
Mezzanine slot 2—4x 4x port 1 3/Port N One double-wide
Port mapping 227