HP BladeSystem Onboard Administrator User Guide - HP Business ...

Click the Port Mapping Interconnect link to display port mapping information on the interconnect bay you
have selected. The port mapping information can also be selected from the navigation tree.
Status information
Row Description
Status
Thermal Status
Powered
Diagnostic Information
Row Description
Device Identification
Data
The overall status of the interconnect device. Possible values are Unknown, OK,
Degraded, and Failed.
The thermal status of the interconnect device. Possible values are Unknown, OK,
Degraded, and Failed.
The power state of the interconnect device. Possible values are On or Off.
Contains information on model name, part number, serial number, and other
information used to identify the device. This data is also referred to as FRU data. Device
identification data error displays if the data is not present or not readable by the
Onboard Administrator.
Management Processor Management processor is not responding. Possible values are OK or Error.
Temperature
Overheat Check
Device Operational
Temperature is above the warning threshold. Possible values are OK or Temperature
Warning.
Temperature is above the danger threshold. Possible values are OK or Critical
temperature threshold reached.
Device has failed; status was not requested by the Onboard Administrator. Possible
values are OK or Error.
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 157