HP BladeSystem Onboard Administrator User Guide - HP Business ...

will receive an alert warning that one Administrator account must remain and the delete action will be
canceled.
Add Local User
Field Possible value Description
Username
Password
Password Confirm
1 to 40 characters, including
all alphanumeric characters,
the dash (-), and the underscore
(_)
When in FIPS mode
ON/DEBUG, the password
must contain at least one
character from three of the four
types of characters. The four
types are upper-case,
lower-case, numeric and
non-alphanumeric. The
password length must be
between 8 and 40 characters.
When in FIPS mode OFF, the
password may include any
printable character, and the
password length must be
between 3 and 40 characters.
When in FIPS mode
ON/DEBUG, the password
must contain at least one
character from three of the four
types of characters. The four
types are upper-case,
lower-case, numeric and
non-alphanumeric. The
password length must be
between 8 and 40 characters.
When in FIPS mode OFF, the
password may include any
printable character, and the
password length must be
between 3 and 40 characters.
To save the settings, click Add User. The Edit Local User screen appears.
Edit Local User
User information
A maximum of 30 user accounts can be added
including the reserved accounts.
The user names ALL (case-insensitive),
ADMINISTRATOR (case-insensitive), switch1,
switch2, switch3, switch4, switch5, switch6,
switch7, switch8, ldapuser, nobody, and
vcmuser_ are reserved and cannot be used.
The user name must begin with a letter and is
case-sensitive.
The password associated with the user.
The password associated with the user. This
value must match the Password value.
NOTE: Duplicate users with the same name and different case can be added. Be sure you select
the appropriate user when assigning or editing user authorization.
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 196