HP BladeSystem Onboard Administrator User Guide - HP Business ...

sent by AlertMail will be @. To enable the AlertMail feature,
select the Enable AlertMail checkbox.
To test the AlertMail function, ensure that the email address, alert sender domain, and SMTP server settings
are correct. Select Send Test AlertMail. To confirm the test completed successfully, verify the recipient email
account.
NOTE: The Alert Sender Domain might not be needed. This field depends on the mail server
setup.
Field Possible value Description
E-Mail address @ A valid e-mail address for the administrator
or other designated individual receiving the
alert mail
Alert Sender
Domain
A character string including all
alphanumeric characters, the dash (-), and
the period (.)
SMTP Server • IPv4 address—###.###.###.###
where ### ranges from 0 to 255
• IPv6
address—####:####:####:####:##
##:####:####:#### where ####
ranges from 0 to FFFF.
• DNS name—1 to 64 characters
including all alphanumeric characters
and the dash (-)
1. Select the Enable AlertMail checkbox to enable the AlertMail feature.
The domain in which the Onboard
Administrator resides
An IPv4 address, IPv6 address, or the DNS
name for the SMTP server
2. Enter values for the e-mail address, alert sender domain, and SMTP server.
3. Click Apply to save settings.
AlertMail, if enabled, sends alerts by e-mail for the following events:
o Enclosure status change
o Enclosure information change
o Fan status change
o Fan inserted
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 72