HP BladeSystem Onboard Administrator User Guide - HP Business ...

Device bay port mapping table for c7000 Enclosure
If a device is not present, the checkbox is disabled and the port cannot be viewed.
The server blades are mapped to the interconnect bays in the following manner. The terms 1x/2x or 4x refer
to the number of interconnect lanes per port provided by the controller. The more lanes provided per port, the
higher the data transmission rate coming from that port.
Half-height server blade
The following table lists the port mapping for half-height server blades installed in c7000 device bay N
(1-16).
Connection Port number Connects to
interconnect bay/port
Embedded NIC
Mezzanine 1
Mezzanine 2
Full-height server blade
NIC 1
NIC 2
Port 1
Port 2
Port 1
Port 2
Port 3
Port 4
1/Port N
2/Port N
3/Port N
4/Port N
5/Port N
6/Port N
7/Port N+8
8/Port N+8
The following table lists the port mapping for full-height server blades installed in device bay N (1-8).
Connection Port number Connects to interconnect bay/port
Embedded NIC
Mezzanine 1
Mezzanine 2
Mezzanine 3
Double dense server blade
NIC 1
NIC 2
NIC 3
NIC 4
Port 1
Port 2
Port 3
Port 4
Port 1
Port 2
Port 3
Port 4
Port 1
Port 2
Port 3
Port 4
1/Port N+8
2/Port N+8
1/Port N
2/Port N
3/Port N
4/Port N
3/Port N+8
4/Port N+8
5/Port N
6/Port N
7/Port N
8/Port N
7/Port N+8
8/Port N+8
5/Port N+8
6/Port N+8
The following table lists the available configurations for double dense devices installed in device bay N
(1-16).
Connection Port Number Connects to interconnect bay/port
Server A Embedded NIC
NIC 1 (Port:1)
NIC 2 (Port:2)
1/Port N
3/Port N
Port mapping 233