Manual T*SOL basic 5.0 - Valentin Software

User Manual T*SOL 6 System Selection
6 System Selection
On starting, you must first select a system.
Image: System selection with system
icons and filters
The system is the solar system you select with a predefined collector loop configuration, storage loop
with corresponding tank type, consumption loop, and the associated control strategy. The separate
components can be exchanged in the system definition.
There are several groups of systems:
• Standard systems,
• Swimming pool systems,
in T*SOL Pro only:
• Air collector systems,
• Large-scale systems,
• Company systems August Brötje, Beretta, Buderus Bosch Thermotechnik, Feuron,
GrammerSolar, IVAR, Paradigma, Riello, Solahart, Sylber, Teufel & Schwarz, Thermital, Vaillant,
Viessmann, Vokera, Wagner, Weishaupt
in T*SOL Expert only:
• Solar local district heating systems
Ł How to proceed:
1. Go to the System Selection .
2. You can choose to display the systems as schematic diagrams or as lists.
3. Select a system.
Systems, which have been tested by Solar Collector Certification Program (SRCC) can be found
either by sorting the column SRCC or by using the search applied to the column SRCC searching
for "yes".
4. You will be asked if you wish to copy the current parameters to this system.
5. Now you can set the system's further parameters via the system definition.
Dr. Valentin EnergieSoftware GmbH page 32 / 104