Manual T*SOL basic 5.0 - Valentin Software
Manual T*SOL basic 5.0 - Valentin Software
Manual T*SOL basic 5.0 - Valentin Software
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
User <strong>Manual</strong> <strong>T*SOL</strong> 6 System Selection<br />
6.1.5 A5 - Combination Tank Systems<br />
Image: A5 - Combination tank system for hot water<br />
and heating<br />
Image: A5.2 - Combination tank system (tank in<br />
tank) for hot water and heating<br />
Image: A5.4 - Combination tank system (tank in tank)<br />
for hot water and heating<br />
Image: A5.1 - Combination tank system for DHW<br />
only<br />
Image: A5.3 - Combination tank system (tank in<br />
tank) for DHW only<br />
Image: A5.5. - Combination tank system for hot<br />
water and heating<br />
The A5 standard systems available differ from one another in the combination tank they use. The tank in<br />
tank system consists of a relatively small DHW tank and a larger tank enclosing it. In the lower area, this<br />
is heated by the solar system, while the upper area is heated by the auxiliary heating.<br />
The other type of combination tank contains an internal heat exchanger for DHW supply which runs<br />
through the entire tank. It is also heated by the solar system in the lower area and by the auxiliary<br />
heating in the upper area.<br />
On the System Definition > Control page, the priority of the DHW circuit for the auxiliary heating can be<br />
set.<br />
The system consists of the following components:<br />
• Collector loop connection, contains<br />
o Collector array, contains<br />
§ Collector<br />
§ Shading<br />
• Combination tank (tank in tank / internal heat exchanger see chapter 10.6.3.4)<br />
• Auxiliary heating<br />
Dr. <strong>Valentin</strong> Energie<strong>Software</strong> GmbH page 38 / 104
Change language