Manual T*SOL basic 5.0 - Valentin Software

User Manual T*SOL 8 Calculations
o Control room
o P controller (2 K)
o P controller (1 K)
o PI controller
o PI controller (with optimization function, e.g. presence controller, adaptive controller)
• Over temperature (room reference temperature 20 °C)
o 60 K (e.g. 90/70)
o 42.5 K (e.g. 70/55)
o 30 K (e.g. 55/45)
• Radiator configuration for calculating specific thermal losses via exterior construction elements
(GS = glass surface)
o Radiator configuration internal wall
o Radiator configuration external wall
§ GS without radiation protection
§ GS with radiation protection
§ Normal external wall
The following settings are available for structurally integrated surfaces (heating surfaces). Electric
heating is not offered by the program
• Temperature control
o Unregulated
o Unregulated with central flow temperature control
o Unregulated with averaging (between inlet and outlet)
o Control room
o Two-step controller / P controller
o PI controller
• System
o Underfloor heating
§ Wet system
§ Dry system
§ Dry system with low overlap
o Wall heating
o Ceiling heating
• Specific thermal losses of laying surfaces
o Surface heating without minimum insulation as per DIN EN 1264
o Surface heating with minimum insulation as per DIN EN 1264
o Surface heating with 100% better insulation than in DIN EN 1265
Dr. Valentin EnergieSoftware GmbH page 80 / 104