Manual T*SOL basic 5.0 - Valentin Software
Manual T*SOL basic 5.0 - Valentin Software
Manual T*SOL basic 5.0 - Valentin Software
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7 System Definition User <strong>Manual</strong> <strong>T*SOL</strong><br />
Combination tank with internal heat exchanger<br />
System Definition > Tank > Heat Exchanger<br />
Image: Input dialog for combination tank<br />
with internal heat exchanger, Heat<br />
Exchanger page<br />
On the Heat Exchangerpage, the definition and distribution of the internal heat exchanger for DHW<br />
supply (heat exchanger parameters) are displayed, but cannot be modified.<br />
Combination tank control<br />
System Definition > Tank > Control<br />
Image: Input dialog for combination<br />
tank, Control page<br />
Both the desired tank temperature relative to the DHW target temperature and the switching<br />
temperatures for switching on the auxiliary heating relative to the input desired tank temperature at the<br />
temperature sensor of the auxiliary heating are entered under Control. Please note that the desired tank<br />
temperature must be considerably higher than the DHW target temperature, so that corresponding heat<br />
transfer between the DHW tank or the internal heat exchanger and the external buffer capacity can take<br />
place.<br />
page 65 / 104 Dr. <strong>Valentin</strong> Energie<strong>Software</strong> GmbH