Stand-Alone Punch machine user manual - Finn-Power International ...
Stand-Alone Punch machine user manual - Finn-Power International ...
Stand-Alone Punch machine user manual - Finn-Power International ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.6.5.2 Sorting<br />
Sorting is used to <strong>manual</strong>ly edit the sorting options of a<br />
part. All aspects of the <strong>machine</strong> sorting devices loaded<br />
into the <strong>machine</strong> parameters can be selected within the<br />
<strong>manual</strong> sorting feature.<br />
Use part Intertool.cp.<br />
Step 1: Open Sorting by going to Tooling menu |<br />
Modify – select Sorting.<br />
Step 2: Select last hit tool. For Intertool.cp select tool<br />
in middle of expanded nibble path from top of part.<br />
Step 3: Once the hit is selected the current sorting assigned will be displayed.<br />
Select Manual from the drop down menu. (Last Operation will be checked, if a<br />
drop sensor for a sorting device is need 1 can be entered into this field)<br />
Step 4: Click OK, then save part.<br />
To view sorting for any part go to View menu | select Unloaders to view which<br />
sorting options the part is utilizing.<br />
4.6.5.3 <strong>Punch</strong>ing Tabs<br />
<strong>Punch</strong>ing tabs allows for a <strong>user</strong> to easily apply tabs to a part<br />
without re-tooling the entire part. Parameters, tab width and<br />
extensions, are easily applied to add the tab to a nibble path<br />
internally or externally. Undo will undo all tabs added<br />
returning them to original state.<br />
4-77