Stand-Alone Punch machine user manual - Finn-Power International ...

. Adding part to Part List. There are two ways to add parts to the
Part List- from database list or from browsing the current part
directory.
1. From the database list- parts listed in the database window are
for the nest’s material set. Find part AutotoolSA.cp, select part
and click the arrow pointing to Scheduled Parts.
2. Browse the current part directory- click Parts browse… and
search through Windows file structure to find AutotoolSA.cp.
c. Enter a quantity of 100 parts
Step 3: Setting up Plate List
a. The plates listed are from the Plate Database. When the plates
were setup there was a priority set for each. The100”x50”
(2500mmx1250mm) plate will be listed at the top of the list
automatically.
b. Use Plate Utilization Option- Use only the first plate size
Initial Parameter Setup
Step 4: Setting parameters for the nest will affect the outcome of the nest.
a. Spacing- both X and Y=0.25” (5mm)
b. Nest accuracy- 0.06” (1.5mm)
c. Direction- top left
d. Uncheck options- Nest in zones, Grid Nesting, Nest by work order
and Nest in holes.
e. Common line- No
f. Plate margins- 0.25” (5mm) for all four
g. Enable Nest under clamps
h. Enable Set to default
5-88