LaCie 2big Network 2 Hard Disk Manual - Tape Resources
LaCie 2big Network 2 Hard Disk Manual - Tape Resources
LaCie 2big Network 2 Hard Disk Manual - Tape Resources
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>LaCie</strong> <strong>2big</strong> <strong>Network</strong> 2 • DESIGN BY NEIL POULTON<br />
Connecting to a <strong>Network</strong><br />
User <strong>Manual</strong> page 14<br />
2.2. STEP 2: Connect the Ethernet<br />
Cable<br />
1. Connect the Ethernet cable to the Ethernet port on the back of<br />
the <strong>LaCie</strong> <strong>2big</strong> <strong>Network</strong> 2 (Fig. 04).<br />
2. Connect the other end of the Ethernet cable into an available<br />
Ethernet “out” port on your router or hub (refer to your router or<br />
hub’s documentation if necessary).<br />
3. Turn on the drive by pressing the power button on the back of<br />
the drive (Fig. 05). The front LED will turn on and then begin<br />
blinking.<br />
The drive is ready to be accessed once the blue LED has stopped<br />
blinking. The product may take up to 3 minutes to boot.<br />
Now move on to step 3, section 2.3. STEP 3: Connect using <strong>LaCie</strong><br />
<strong>Network</strong> Assistant.<br />
Fig. 04<br />
TECHNICAL NOTE: Depending on your computer’s Ethernet settings,<br />
you may be able to connect the <strong>2big</strong> <strong>Network</strong> 2 directly to<br />
your computer using the Ethernet cable.<br />
Gigabit Ethernet Cables And Connectors<br />
See Fig. 06 for an illustration of the Ethernet cable used to connect<br />
your <strong>LaCie</strong> <strong>2big</strong> <strong>Network</strong> 2 to your network device. The ends of the<br />
Ethernet cable are the same and either end can be connected to the<br />
<strong>LaCie</strong> <strong>2big</strong> <strong>Network</strong> 2 or your router.<br />
Fig. 05<br />
Fig. 06 - Gigabit Ethernet cable ends
Change language