ER-A440 Operation-Manual GB - Sharp

Example
Programming for PLU code 1 as follows: A=0, B=0, C=0, D=0, E=0, F=0, G=1, and H=2.
1. Enter the PLU code “1”
and press the ß key twice.
1 ß ß
ABCDEFGH
P 00000002
2. Set the parameters A to H. 00000012
•You can go to the desired position with the º
or . key.
3. Press the ≈ key to program this setting. ≈
4. Press the ; key to finalize the programming
and generate a programming report. ;
P 00000012
P 00000002
0.00
Print
Taxable 1
PLU mode
PLU assignment to departments
PGM 1
PGM 2
Procedure
XXXXXX
PLU code
Direct PLU
key
*Department key to be associated with the entered PLU
Note
Example
*
ß
ßß Department key
;
XXXXXX
ß c
Direct PLU
key
Direct PLU
key
PLU code
• The following functions of the PLU depend on the programming for its associated department:
• Grouping (Group 1 through 14)
• SICS (Single Item Cash Sale)/SIF (Single Item Finalization)/Normal
• Item validation print compulsory/non-compulsory
• HALO (high amount lockout)
Assigning PLU codes 1 and 2 to department 2
To delete the entered PLU
Direct PLU key
?
To keep the current setting
Associated dept. code
(1 to 50) :
1. Enter the PLU code “1”
and press the ß key three times.
1 ß ß ß
000001 01
2. Press the the department 2 key to assign
PLU code 1 to department 2. 2 000002 01
21