ER-A440 Operation-Manual GB - Sharp
ER-A440 Operation-Manual GB - Sharp
ER-A440 Operation-Manual GB - Sharp
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Clerk code<br />
You can assign a clerk code to each of 99 clerks. The standard machine has no clerk function. If you need this<br />
function, consult your dealer.<br />
Procedure<br />
PGM 1<br />
PGM 2<br />
1400<br />
Clerk no.<br />
*Clerk code<br />
1400<br />
. ≈ (1 to 99) ≈ (0 - 99) : ;<br />
The current setting is displayed.<br />
To keep the current setting<br />
*: Programming clerk code “0” inhibits entries of the clerk code.<br />
Example<br />
Key operation<br />
Print<br />
1400 . ≈<br />
1 ≈ 11 :<br />
4 ≈ 14 :<br />
;<br />
Clerk no.<br />
Clerk code<br />
Clerk name<br />
You can program a maximum of 8 characters (clerk name) for each clerk. Select the characters you want to<br />
program referring to section “2 How to program alphanumeric characters” in chapter “PRIOR TO<br />
PROGRAMMING.”<br />
Procedure<br />
PGM 1<br />
PGM 2<br />
1414<br />
To program spaces<br />
*: A code you have programmed for * the clerk by the job code 1400.<br />
Clerk code<br />
Character keys<br />
(1 - 99)<br />
(max. 8 digits)<br />
1414<br />
. ≈ ≈ : ;<br />
*: A clerk code you have programmed for the clerk by the job code 1400<br />
Example<br />
Key operation<br />
Print<br />
1414 . ≈<br />
11 ≈ NILS :<br />
;<br />
55