ER-A440 Operation-Manual GB - Sharp

7
Programming for the ;, Å, ( through +, and ] through ’ keys
Functional programming
You can set each media for:
PGM 2
2320
EFT Transaction
For ( through + keys, and ] through ’ keys
Footer printing
This programming decides whether or not your machine should print a message at the foot of a receipt when
a specified media key is used.
Non-add code compulsory
You can enforce the non-add code entry when a media entry is accepted.
Change enable (over-tender)
Either change enable or disable can be selected for a corresponding media key.
Compulsory validation print
If media entries must be validated, set the corresponding media for compulsory validation print.
Drawer open
You can program each media key to or not to open the drawer.
Amount tendered compulsory
You may select amount tendered compulsory or optional for the ;, Å and ( through + keys.
You may select amount tendered compulsory or inhibited for the ] through ’ keys.
Procedure
The current
setting is
displayed.
To keep the current setting
*1 *2
2320 Function no.
ABCDEFG
. ≈ ≈ : ;
*1: Function no.
42: For the ; key 46: For the * key 50: For the ‘ key
43: For the Å key 47: For the + key 51: For the ’ key
44: For the ( key 48: For the ] key
45: For the ) key 49: For the } key
*2 Item: Selection: Entry:
A EFT transaction Compulsory 1
Non-compulsory 0
B Footer print Yes 1
No 0
C Non-add code Compulsory 1
Non-compulsory 0
D Change due Disable 1
Enable 0
E Validation print Compulsory 1
Non-compulsory 0
F Drawer open No 1
Yes 0
G Amount tendered entry Compulsory 1
Non-compulsory for TL, CA2 or CH1 through CH4 keys 0
Inhibit for the CR1 through CR4 keys 0
49