ER-A440 Operation-Manual GB - Sharp

Note
For some items, you can program in two ways: programming an individual PLU code and for a
range of sequential PLU codes. The procedure marked “For each PLU” shows individual PLU
programming. “For a range of PLUs” shows sequential range PLU programming.
Department assignment
PGM 1
PGM 2
1200
2230
Direct
Procedure
For each PLU
The current
setting
is displayed.
*1 *4
1200 PLU code
. ≈ ≈
c
To keep the
current setting
AB
To program for the following PLU
: ;
Note
As soon as the programming is completed for one PLU, the next PLU code appears in the display.
For a range of PLUs
2230
. ≈
*2 *3
Start PLU code
The current setting
of start PLU code
is displayed.
To apply the current
setting of start PLU code
to PLUs within the range
*4
End PLU code
AB
≈ ≈ : ;
*1, 2, 3: 1 to 999999 (free code)
*4: AB: Associated department code
Example
For each PLU
Key operation
1200 . ≈
1 ≈ 2 :
2 :
;
Print
PLU code
Associated dept.
For a range
of PLUs
Key operation
2230 . ≈
11 ≈ 20 ≈
3 :
;
Print
PLU range
Associated dept.
37