PRE-DRIVE C2X Deliverable D0.3 Final report_20100929.pdf

Final Report PRE-DRIVE C2X 29.9.2010
Figure 3 shows the final structure of the COMeSafety Architecture Task Force. PRE-
DRIVE C2X became a member in spring 2009.
Figure 3: Members of the COMeSafety architecture task force
Based on the deliverables D1.2 and D1.4, WP1000 initiated a harmonization
workshop together with the COMeSafety Architecture Task Force. The goal was to
define the further steps towards a common European architecture document. In this
workshop, we achieved the following results:
Both PRE-DRIVE C2X deliverables D1.2 and D1.3 form the basis for the
common architecture document.
All related European projects will contribute to this common architecture
document. The overall goal of this activity is to evolve the common architecture
document towards standardization. Therefore, a common process was
developed and agreed on how to contribute (and to handle) this common
architecture document.
In order to evolve this document, a couple of teams were established based on
different aspects of the communication architecture. The contributors in these
teams were from the different projects, and the goal was to develop the
respective part in the common document.
In order to consolidate a harmonized European ITS architecture for cooperative
systems, WP1000 has organized two joint workshops with PRE-DRIVE C2X
WP1000 partners and the COMeSafety Architecture Task Force. In both workshops
a process for the consolidation of the architecture documents of PRE-DRIVE C2X
(D1.2 and D1.3) and COMeSafety has been discussed and working groups for
Deliverable D0.3 Version 1.0 4
Final Report