PRE-DRIVE C2X Deliverable D0.3 Final report_20100929.pdf

Final Report PRE-DRIVE C2X 29.9.2010
Hitachi RSU hosts all the components in a ruggedized and waterproof box. The
Hitachi RSU follows the PRE-DRIVE C2X architecture. In particular, it includes an
IEEE 802.11p compliant radio device, a 3G modem, a WiFi device and a LAN
interface. The wide number of communication device allows the RSU to be used in
different environments and for different applications.
The Application Unit is a Linux x86 system running a Knopflerfish-Framework, which
is a car-pc. The Communication Unit installed is a Renesas Wave Box v2.
2.3.3.7 Documentation of results
All WP3000 results described above are documented in the following deliverables:
Deliverable D3.1 “Detailed selection procedure description of hardware and
software components and corresponding specifications of the selected ones”.
Deliverable D3.2 “Detailed Selection procedure description of testing tools and
software components and relative specification of the selected ones”
Deliverable D3.3 “Complete Prototype System, including Hardware and
Software components”
Deliverable D3.4 “Detailed report on the core components’ integration, functional
verification and duplication results”
2.3.4 WP4000 Methodologies and tools for field operational test management and
validation
WP4000 aimed at providing a methodology and related tools to prepare and conduct
large-scale field operational tests of ITS systems enabled by car-to-xcommunication.
It took also care of the selection of the use cases to be
demonstrated in PRE-DRIVE C2X and investigated existing test tracks and ITS test
sites for their suitability to host a large scale field operational trial with vehicular
communication technology.
2.3.4.1 Use case selection
The first task of WP4000 was to select the most promising use cases for C2X
communication. The selection process, the various use cases the WP team looked
at and the ones that were finally selected are documented deliverable D4.1
“Detailed description of selected use-cases and corresponding technical
requirements”. This document includes a list of all relevant use cases, which make
use of C2X communication. As outlined in section 2.2.4 of this report, work package
4000 reviewed the results of all relevant projects and publications and prepared a
consolidated list of 53 use cases that were described using a standardised format.
These use cases were grouped according to their major objectives:
Deliverable D0.3 Version 1.0 53
Final Report