PRE-DRIVE C2X Deliverable D0.3 Final report_20100929.pdf
PRE-DRIVE C2X Deliverable D0.3 Final report_20100929.pdf
PRE-DRIVE C2X Deliverable D0.3 Final report_20100929.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Final</strong> Report <strong>PRE</strong>-<strong>DRIVE</strong> <strong>C2X</strong> 29.9.2010<br />
Data sheets of the selected components are available but not part of this <strong>report</strong>.<br />
2.3.3.3 Delphi CCU<br />
Delphi’s Car-2-Car Communication Unit is designed to be a powerful solution for<br />
integrating ITS applications and managing data flows in motor vehicles or their<br />
trailers and on rail vehicles.<br />
Based on the standard x86 architecture offered by the Intel Core2Duo 2GHz<br />
processor and Intel 945E chipset with 1GB DDR2 RAM, the system offers a high<br />
calculating capability with fast software development.<br />
The mass storage is realized through an 8GB SSD (solid-state disk, i.e. CF on<br />
SATA2 adapter) to reduce the risk of damage and loss of data. Also the by utilizing<br />
a SSD instead of rotary hard disks the system can be operated in slightly higher<br />
environmental temperatures.<br />
The system provides a standard set of interfaces. The rear panel of the system is an<br />
ATX compliant and hosts most of the interfaces provided by the unit. The power<br />
supply socket as well as the power switch are also located at the rear and<br />
illuminated (green) during operation. The front panel is dedicated to maintenance<br />
interfaces, two USB sockets, one DB9 serial socket (COM2) and a female SMA<br />
connector for the DSRC-Antenna. These interfaces are available without<br />
disconnecting the system from the field.<br />
Figure 29: DELPHI OBU – Rear Panel<br />
Figure 30: DELPHI OBU – Front Panel<br />
<strong>Deliverable</strong> <strong>D0.3</strong> Version 1.0 43<br />
<strong>Final</strong> Report
Change language