Download Tender Document - High Commission of India, Colombo

Development of Atchchuvali Industrial Estate,
Jaffna, Sri Lanka.
Page PP/23
Pricing Preambles
3.7 WOOD WORK
a) All timber shall be approved quality Class 1 timber unless specified otherwise in the specifications or
drawings.
b) The work shall include supply, fabricate and installation of doors / windows, with approved quality
timber and finished as per the respective specification and the drawings.
c) All samples shall be provided for Engineer's approval prior to purchase of material.
d) All timber shall be pressured impregnated termite proof, seasoned, planed timber and sand papered
by hand to have a smooth finish to receive paint.
e) Only 16% of moisture content is recommended for all timber.
f) The sizes given in the drawings and description of Bill of Quantities are final finished sizes.
g) The contractor shall check the measurement of openings physically at the site before fabricating the
doors / windows.
h) All the locks and ironmongery shall be as approved by the Architect. Samples shall be approved by
the Architect prior to purchase.
i) Ironmongery and door furniture used including nails, screws, hinges, stays, pull rings and the like
shall be of brass unless specifically stated otherwise in the drawings or the specifications.
Unless specified otherwise, rates shall include for:
a) Hoisting and fixing in position, drilling and making good.
b) All necessary brass nails hinges and screws, glue, rawl plugs etc,.
c) Unless specified otherwise, 5mm thick clear float glass as appropriate to suit the respective doors
and windows.
d) Fixing timber frames / sashes with brass screws, lock sets with 3 keys manufactured in Europe to be
used on all doors.
e) Painting with two coat of wood preservative, two coats of primer and two final coats of wood sheen
spray paint