V50 w646.book - ESD - Volvo

05 Locks and alarm
Remote control with key blade
Weak remote control battery
When the battery runs down and full functionality
cannot be guaranteed, the information
symbol and REMOTE BATTERY LOW
VOLTAGE appear on the display.
Replacing the remote control battery
– Refit the cover and screw it shut.
– Press the key blade back into place.
Dispose of the old battery in an environmentally-friendly
way.
If the locks repeatedly fail to respond to signals
from the remote control at a normal distance,
the battery should be replaced (type
CR 2032, 3 V).
– Pull out the key blade.
– Place the remote control with the keypad
downward and remove the screw (1) using
a small screwdriver.
– Remove the cover.
– Carefully note the position of the battery’s
+ and – poles on the inside of the cover.
– Prise out (2) and change the battery. Avoid
touching the battery and its terminals with
your fingers.
05
103