V50 w646.book - ESD - Volvo

06 Starting and driving
General
Clean the electric contacts of the electric engine
block heater and trailer coupling after
driving in water and mud.
IMPORTANT
Do not let the car stand with water over the
sills for any long period of time. This could
cause electrical malfunctions.
In the event of stalling in water, do not try to
restart. Tow the car out of the water.
Do not overload the battery
The electrical functions in the car load the
battery to varying degrees. Avoid using the
ignition position II when the engine is
switched off. Use ignition position I instead,
as less power is consumed.
Examples of functions that use a lot of power:
• ventilation fan
• windscreen wipers
• audio equipment (high volume)
• parking lights
Also, be aware of different accessories that
load the electrical system. Do not use functions
which use a lot of power when the engine
is switched off.
If the battery voltage is low, a message appears
on the display. The energy-saving
function shuts down certain functions or reduces
the load on the battery by, for example,
slowing the ventilation fan and switching
off the audio equipment. Charge the battery
by starting the engine.
06
117