01.01.2015 Views

V50 w646.book - ESD - Volvo

V50 w646.book - ESD - Volvo

V50 w646.book - ESD - Volvo

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

06 Starting and driving<br />

Automatic gearbox<br />

06<br />

Manual positions<br />

To move from the automatic driving<br />

position D to a manual position, move the<br />

gear selector to position M. To go from<br />

position M to the automatic driving<br />

position D, move the selector to position D.<br />

While driving<br />

The manual gearshift mode can be selected<br />

at any time while driving. The engaged gear<br />

is locked until you choose another gear.<br />

If the gear selector is moved to – (minus) the<br />

car changes down a gear and engine brakes<br />

at the same time as the accelerator pedal is<br />

released. If the gear selector is moved to<br />

+ (plus) the car changes up a gear.<br />

The selected gear is indicated on the combined<br />

instrument panel, see page 41.<br />

NOTE<br />

Geartronic contains two safety functions:<br />

• Geartronic does not permit downshifting/<br />

kick-down which would result in an engine<br />

speed high enough to damage the engine.<br />

Nothing happens if the driver tries to shift<br />

down in this way. The original gear remains<br />

engaged.<br />

• Geartronic automatically shifts down if the<br />

driver allows the speed to decrease lower<br />

than a level suitable for the selected gear,<br />

in order to avoid jerking and stalling.<br />

W – Winter<br />

The W button is used to activate<br />

and deactivate the<br />

winter programme W. Display<br />

of the W symbol in the<br />

combined instrument panel<br />

indicates that the winter<br />

programme is active.<br />

The winter programme starts the gearbox in<br />

a higher gear to facilitate starting off on slippery<br />

surfaces. The lower gears are only activated<br />

with kick-down when the winter programme<br />

is engaged.<br />

The W programme can be selected regardless<br />

of the position of the gear selector, but is<br />

only operational when the selector is in<br />

position D.<br />

To prevent overrevving, the gearbox control<br />

program has a protective downshift inhibitor.<br />

126

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!