V50 w646.book - ESD - Volvo

06 Starting and driving
Towing and recovery
2. Release the cover (1) on the bumper
with a screwdriver or coin in the bottom
edge.
3. Screw in the towing eye (3) firmly, right
up to the flange. Use the wheel wrench
to tighten the towing eye.
4. After use, unscrew the towing eye and
return it in the cargo area. Refit the
cover on the bumper.
IMPORTANT
The towing eye is only designed for towing
on roads, not for pulling the car unstuck or
out of a ditch. Call a recovery service for assistance.
06
138