01.01.2015 Views

V50 w646.book - ESD - Volvo

V50 w646.book - ESD - Volvo

V50 w646.book - ESD - Volvo

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

02 Instruments and controls<br />

Right-hand stalk switch<br />

02<br />

Rear window wiper and washer<br />

Press the stalk switch forward to initiate rear<br />

window washing and wiping. The wiper blade<br />

makes several sweeps once washing has finished.<br />

The control at the end of the stalk has<br />

three positions:<br />

Intermittent wiping:<br />

– Depress the top of the switch.<br />

Normal speed:<br />

– Depress the bottom of the switch.<br />

Neutral:<br />

– Function deactivated.<br />

Wiper – reversing<br />

Engaging reverse gear while the windscreen<br />

wipers are on initiates intermittent rear window<br />

wiping. If the rear window wiper is already<br />

on at normal speed, no change is<br />

made.<br />

The function for intermittent wiping for reverse<br />

can be deactivated. Contact an authorised<br />

<strong>Volvo</strong> workshop.<br />

Rain sensor (option)<br />

The rain sensor automatically activates the<br />

windscreen wipers based on how much water<br />

it detects on the windscreen. The sensitivity<br />

of the rain sensor can be adjusted using<br />

the thumbwheel (C).<br />

Turn the thumbwheel clockwise for higher<br />

sensitivity and anticlockwise for lower sensitivity.<br />

(An extra sweep is made when the<br />

thumbwheel is turned clockwise.)<br />

On/Off<br />

When activating the rain sensor, the ignition<br />

key must be in position I or II and the windscreen<br />

wiper stalk switch must be in<br />

position 0.<br />

Activating the rain sensor:<br />

– Press the button (B). A display symbol<br />

shows that the rain sensor is active.<br />

To turn the rain sensor off, either:<br />

– Press button (B)<br />

– Press the stalk switch downward to another<br />

wiper program. If the stalk switch is<br />

raised, the rain sensor will remain active,<br />

the wipers make an extra sweep and then<br />

return to rain sensor mode when the stalk<br />

is released to position 0.<br />

The rain sensor is automatically deactivated<br />

when the key is removed from the ignition<br />

switch or five minutes after the ignition is<br />

switched off.<br />

IMPORTANT<br />

At an automatic car wash: Deactivate the<br />

rain sensor by pressing the button (B) while<br />

the ignition key is in position I or II. Otherwise,<br />

the windscreen wipers could start<br />

swiping and become damaged.<br />

Thumbwheel<br />

Use the thumbwheel to adjust the frequency<br />

of sweeps when intermittent wiping is selected,<br />

or the sensitivity to rain when the rain<br />

sensor is selected.<br />

54

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!