01.01.2015 Views

V50 w646.book - ESD - Volvo

V50 w646.book - ESD - Volvo

V50 w646.book - ESD - Volvo

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

02 Instruments and controls<br />

Cruise control (option)<br />

Activating<br />

The controls for cruise control are to the left<br />

of the steering wheel.<br />

Setting the desired speed:<br />

– Press the CRUISE button. CRUISE is<br />

shown on the combined instrument panel.<br />

– Touch + or — to lock the vehicle speed.<br />

CRUISE-ON appears on the combined<br />

instrument panel.<br />

Cruise control cannot be engaged at speeds<br />

below 30 km/h or above 200 km/h.<br />

Increasing or decreasing speed<br />

– Increase or decrease the speed by pressing<br />

and holding + or —. The speed of the<br />

car when the button is released is set as<br />

the new speed.<br />

Pressing (less than half a second) + or —<br />

changes the speed 1 km/h or 1.6 km/h 1 .<br />

NOTE<br />

A temporary increase in speed (less than<br />

one minute) using the accelerator, such as<br />

while overtaking, does not affect the cruise<br />

control setting. When you release the accelerator,<br />

the car will return to the programmed<br />

speed.<br />

Temporary disengagement<br />

– Press 0 to disengage the cruise control<br />

temporarily. CRUISE will be shown on the<br />

combined instrument panel. The speed<br />

set earlier is stored in the memory.<br />

The cruise control is also temporarily disengaged<br />

when:<br />

• the brake pedal or clutch pedal is depressed<br />

• speed falls below 25–30 km/h when travelling<br />

uphill 1<br />

• the gear selector is moved to position N<br />

• wheel spin or wheel lock-up occurs.<br />

• a temporary increase in speed lasts longer<br />

than one minute.<br />

02<br />

1 Depending on engine type.<br />

55

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!